Clear filters

From DXSpider Documentation Wiki
Revision as of 15:40, 18 December 2008 by G0vgs (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Clear filters

A clear filter line will delete the slot number specified or all slots and consequently all filters that have been created by a user.

Syntax: clear/spots [0-9]


clear/spots all

Example ...

This will clear any or both accept and reject spot filters in slot 2.

clear/spots 2

This will clear each and every user spot filter - it will clear out all filters in all slots.

clear/spots all

Note - if you just want to replace a spot filter, enter the rule again (with a line number) and it will overwrite the previous filter in that slot. If you forget the line number, it will overwrite the filter in slot 1 by default.