Clear filters

From DXSpider Documentation Wiki
Revision as of 19:01, 11 August 2008 by G0vgs (talk | contribs) (New page: �[1m8. Clear filters�[0m A clear filter line will delete the slot number specified or all slots and consequently all filters that have been created by a user. Syntax: clea...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
�[1m8.  Clear filters�[0m
A clear filter line will delete the slot number specified or all slots
and consequently all filters that have been created by a user.


     Syntax: clear/spots [0-9]
     or
     clear/spots all


Example ...


This will clear any or both accept and reject spot filters in slot 2.


     clear/spots 2


This will clear each and every user spot filter  - it will clear out
all filters in all slots.


     clear/spots all


Note - if you just want to replace a spot filter, enter the rule again
(with a line number) and it will overwrite the previous filter in that
slot. If you forget the line number, it will overwrite the filter in
slot 1 by default.