All public logs

Jump to navigation Jump to search

Combined display of all available logs of The DXSpider Documentation Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

Logs
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
  • 17:54, 10 February 2023 G0vgs talk contribs moved page NODE CONFIGURATION FOR USER ACCESS to Node configuration for user access
  • 08:22, 1 February 2023 G0vgs talk contribs created page CVS (Created page with "==CVS== ===CVS from a Linux platform=== CVS stands for "Concurrent Versions System" and the CVS for DXSpider is held at Sourceforge. This means that it is possible to update your DXSpider installation to the latest sources by using a few simple commands. A graphical interface to CVS for Windows is explained in the next section. Please be aware that if you update your system using CVS, it is possible that you could be running code that is very beta and not fully test...")
  • 08:21, 1 February 2023 G0vgs talk contribs created page Security (Created page with "==Security== From version 1.49 DXSpider has some additional security features. These are not by any means meant to be exhaustive, however they do afford some security against piracy. These two new features can be used independently of each other or in concert to tighten the security. ===Registration=== The basic principle of registration is simple. If a user is not registered by the sysop, then they have read-only access to the cluster. The only thing they can act...")
  • 08:21, 1 February 2023 G0vgs talk contribs created page Web based statistics (Created page with "==Web based statistics== ===Generic installation=== From version 1.50, you can use the freeware software MRTG to produce really nice graphical statistics on your web site. For an example try http://www.gb7mbc.net/mrtg/stats.html. The following should help you get it all working. First you need to download the latest version of MRTG from http://people.ee.ethz.ch/~oetiker/webtools/mrtg/. You will also need the following files.. libpng-1.0.14.tar.gz zlib-1.1.4.tar....")
  • 08:20, 1 February 2023 G0vgs talk contribs created page Java Web applet (Created page with "==Java Web applet== In the spider tree will be a directory spider-web. This is a neat little java web applet that can be run from a website. The applet must run on the same machine as the cluster. The included README file is shown below. I should comment here that the applet is precompiled, that is, ready to go. It was compiled using JDK1.3.1. If your version is earlier than this then it may not work. Should that be the case you need to recompile or update your J...")
  • 08:19, 1 February 2023 G0vgs talk contribs created page Information, files and useful programs (Created page with "==Information, files and useful programs== ===MOTD=== One of the more important things a cluster sysop needs to do is to get information to his users. The simplest way to do this is to have a banner that is sent to the user on login. This is know as a "message of the day" or "motd". To set this up, simply create a file in /spider/data called motd and edit it to say whatever you want. It is purely a text file and will be sent automatically to anyone logging in to th...")
  • 08:19, 1 February 2023 G0vgs talk contribs created page Databases (Created page with "==Databases== Spider allows the creation of local or remote databases. It supports chained databases, allowing several different databases to be scanned with one simple command. Importing of databases is limited at present to the standard AK1A databases such as OBLAST and the DB0SDX QSL database but will expand with time. ===Creating databases=== Creating a database could not be more simple. All the commands are sent from the cluster prompt as the sysop user. To c...")
  • 08:16, 1 February 2023 G0vgs talk contribs created page Scripts (Created page with "==Scripts== From 1.48 onwards it will become increasingly possible to control DXSpider's operation with scripts of various kinds. The directory /spider/scripts is where it all happens and is used for several things. Firstly it contains a file called startup that can be used to call in any changes to the cluster from the default settings on startup. This script is executed immediately after all initialisation of the node is done but before any connections are possible...")
  • 08:15, 1 February 2023 G0vgs talk contribs created page Other filters (Created page with "==Other Filters== ==Filtering Mail== In the /spider/msg directory you will find a file called badmsg.pl.issue. Rename this to badmsg.pl and edit the file. The original looks something like this .... # the list of regexes for messages that we won't store having # received them (bear in mind that we must receive them fully before # we can bin them) The format of each line is as follows # type source pattern # P/B/F T/F/O/S...")
  • 08:14, 1 February 2023 G0vgs talk contribs created page Routing and Filtering (Created page with "==Introduction== From DXSpider version 1.48, major changes were introduced to the way node connections are treated. This is part of an ongoing process to remove problems with loops and to enable talk and other functions to propagate across the whole of the worldwide cluster network. In fact, in a Spider network, it would be useful, perhaps even necessary to have loops. This would give real resilience to the network, meaning that if a link dropped, the information flo...")
  • 08:14, 1 February 2023 G0vgs talk contribs created page DXSpider Administration Manual (Created page with "#Authors and Contributors #Routing and Filtering ##Introduction ##Route filters ##The node_default filter ##General route filtering ##General filter rules ##Types of filter ##Routing_and_Filtering...")
  • 15:36, 30 January 2023 User account EA3CV talk contribs was created by G0vgs talk contribs
  • 08:08, 29 January 2023 G0vgs talk contribs created page DXSpider Configuration Manual (Created page with "This is a placeholder for the new configuration manual...")
  • 15:30, 27 January 2023 G0vgs talk contribs blocked MediaWiki default talk contribs with an expiry time of indefinite (account creation disabled)
  • 09:53, 27 January 2023 G0vgs talk contribs deleted page Installation Manual (New) (content was: "This page will become the default Installation Manual. It is a work in progress.", and the only contributor was "G0vgs" (talk))
  • 09:51, 27 January 2023 G0vgs talk contribs created page DXSpider Installation Manual (New) (Created page with "This page is a work in progress and will be the new Installation Manual")
  • 09:44, 27 January 2023 G0vgs talk contribs created page Installation Manual (New) (Created page with "This page will become the default Installation Manual. It is a work in progress.")
  • 07:42, 27 January 2023 User account EI6IZ talk contribs was created by G0vgs talk contribs
  • 08:04, 25 January 2023 G0vgs talk contribs changed group membership for G1TLH from (none) to administrator
  • 08:04, 25 January 2023 User account G1TLH talk contribs was created by G0vgs talk contribs
  • 07:53, 25 January 2023 User account W1NR talk contribs was created by G0vgs talk contribs (Adding Mike in for Centos)
  • 19:11, 24 January 2023 G0vgs talk contribs created page MediaWiki:Sidebar (Created page with " * navigation ** mainpage|mainpage-description ** translations-url|Translations ** recentchanges-url|recentchanges ** randompage-url|randompage ** helppage|help-mediawiki * SEARCH * TOOLBOX * LANGUAGES")
  • 19:02, 24 January 2023 G0vgs talk contribs created page Translations (Created page with " The DXSpider Benutzer-Handbuch v1.51 Ian Maude, G0VGS, (g0vgs@gb7mbc.net) February 2003 revision 0.2 uebersetzt im April 2003 (dj2ang/dh0sp), korrekturgelesen und aktualisiert auf April 2003, rev. 0.5 im Juli 2003 (dl3sbb) aktualisiert auf Stand Juni 2004 - Rev. 1.0 im Juli 2004 (dl3sbb) Eine umfassendes Handbuch fuer Benutzer des "DXSpider" DXCluster Programmes ------------------------------------------------------------------------------- Inhaltsuebersicht 1. E...")
  • 18:59, 24 January 2023 G0vgs talk contribs created page Windows (Created page with "==Windows== ===What does "EINPROGRESS" or "EWOULDBLOCK" not exported by Errno.pm mean?=== These are messages put out by starting cluster.pl under Windows with certain releases of Activestate perl. The messages are warnings and can be safely ignored. They happen because Unix systems have these error condition names as synonyms for another error. Windows does not have them and so it complains about it on startup. The warnings are entirely benign.")
  • 18:58, 24 January 2023 G0vgs talk contribs created page Administration (Created page with "==Administration== ===How can I get Spider to restart automatically if it crashes?=== Put this line into /etc/inittab .. DX:3:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop > /dev/tty7 Run telinit q as root. Spider will restart so be aware. However, any time you reboot, cluster.pl will start in tty7 and if it crashes, it should restart ok. ===How can I monitor traffic to and from a node or user?=== There are 2 ways to achieve this. You can...")
  • 18:58, 24 January 2023 G0vgs talk contribs created page Installation (Created page with "==Installation== ===Where do I get DXSpider=== All things Spider can be found at http://www.dxcluster.org and the actual program and patches can be found in the download area. Linux users can download a tarball ([http://www.dxcluster.org/download/CVSlatest.tgz CVSlatest.tgz]) and Windows users can download a zip file ([http://www.dxcluster.org/download/CVSlatest.zip CVSlatest.zip]) ===How do I use the patches=== Patching is done in the standard linux way ... zcat...")
  • 18:52, 24 January 2023 G0vgs talk contribs created page DXSpider Command Reference (Created page with "==ACCEPT== *accept - Set a filter to accept something There are 2 types of filter, accept and reject. See HELP FILTERING for more info. ===accept/announce=== *accept/announce [0-9] <pattern> Set an 'accept' filter line for announce Create an 'accept this announce' line for a filter. An accept filter line means that if the announce matches this filter it is passed onto the user. See HELP FILTERING for more info. Please read this to understand how filters w...")
  • 18:49, 24 January 2023 G0vgs talk contribs created page DXSpider FAQ (Created page with "#Installation ##Where do I get DXSpider? ##How do I use the patches? ##If I use a tarball to overwrite my installation, what happens to my configuration? ##Installation#I am running RedHat 5.2 and I am getting strange errors, what is wrong?|I am running RedHat 5.2 and I am getting st...")
  • 18:49, 24 January 2023 G0vgs talk contribs created page Contacts (Created page with "==Contacts== This Primer is a work in progress. Additional features and filters are added from time to time by Dirk Koopman, G1TLH, the developer behind DXSpider. So periodic revisions will be made to this document. If you have any questions, comments, or suggestions relative to this primer on spot filtering, please contact, Jim Samuels, W3BG jimsam@comcast.net or Dave Hawes, N3RD (W3FRC Cluster SYSOP) dave.n3rd@comcast.net")
  • 18:48, 24 January 2023 G0vgs talk contribs created page Some Practice Examples (Created page with "=Some Practice Examples= The proceeding sections have discussed the basics of DXSpider filters. The following are some examples utilizing basic filters and some not so basic combination filters. Let's say you don't want to see any of those 6m, 2m, or 220 spots. reject/spot 0 on uhf As a good stand alone contest filter ... accept/spot on contesthf/<mode> where mode is either CW, SSB, or RTTY '''Note:''' since a slot number is not included slot 1 is assumed. It's...")
  • 18:48, 24 January 2023 G0vgs talk contribs created page Clear filters (Created page with "=Clear filters= A clear filter line will delete the slot number specified or all slots and consequently all filters that have been created by a user. Syntax: clear/spots [0-9] or clear/spots all Example ... This will clear any or both accept and reject spot filters in slot 2. clear/spots 2 This will clear each and every user spot filter - it will clear out all filters in all slots. clear/spots all '''Note''' - if you just want to replace a spot filter, ent...")
  • 18:47, 24 January 2023 G0vgs talk contribs created page Accept filters (Created page with "=Accept filters= An accept filter line means that if a spot matches pass it on to the user, send it down the line to the next rule or to the user, and trash, dump, all other spots that do not match to the next filter line. Syntax: accept/spots [0-9] <pattern> Any of the following patterns may be used in this line ... freq <range> on <range> info <string> call <prefixes> call_dxcc <numbers> call_itu <numbers> call_zone <numbers> call_state <state2-letter abb...")
  • 18:47, 24 January 2023 G0vgs talk contribs created page Reject filters (Created page with "=Reject filters= A reject filter line means that if a spot matches, send it to the trash, dump it, do not send it down the line to the next rule or to the user, but pass-on all other spots that do not match. Syntax: reject/spots [0-9] <pattern> Any of the following patterns may be used in this line ... freq <range> on <range> info <string> call <prefixes> call_dxcc <numbers> call_itu <numbers> call_zone <numbers> call_state <state 2-letter abbreviations> b...")
  • 18:46, 24 January 2023 G0vgs talk contribs created page Types of spot filters used in DXSpider (Created page with "==Types of spot filters used in DXSpider== Basic filter types are "accept", "reject", and "clear" where the following applies ... *Reject filters - any spots that match will be dumped, all others passed on. *Accept filters - any spots that match are passed on, all others are dumped. *Clear filters - the filter slot(s) referenced will be cleared from the filter repository For the most part we will use only reject and accept filters. These are the main filter types. Ba...")
  • 18:46, 24 January 2023 G0vgs talk contribs created page Configuring spot filters (Created page with "==What is a spot filter== A spot filter is one rule (a one line spot filter) or multiple rules (multiple line spot filters) that a user can setup within DXSpider to control which specific spot(s) are received at the shack console. These configurable filters/rules reside on the DXSpider node and are stored along with the user's other information. Filters can be likened to a car wash . . . . . like cars, information goes in one end dirty, gets washed and comes out the oth...")
  • 18:46, 24 January 2023 G0vgs talk contribs created page Foreword (Created page with "While attempting to learn how DXSpider filters work, I found that I had to glean bits and pieces of information from the DXSpider User Manual and Administrators Guide as well as various posted messages, help files and the program and data-base files themselves. Therefore, this is by no means an original work. I have used and in some cases copied from some of these sources. What I have tried to accomplish is to gather this scattered information, put it in one spot (please...")
  • 18:45, 24 January 2023 G0vgs talk contribs created page Introduction (Created page with "The original PacketCluster software written in the mid-80s by Dick Newell, AK1A. DXSpider is a modern replacement and is written by Dirk Koopman, G1TLH.")
  • 18:44, 24 January 2023 G0vgs talk contribs created page DXSpider Filtering Manual (Created page with "The original PacketCluster software written in the mid-80s by Dick Newell, AK1A. DXSpider is a modern replacement and is written by Dirk Koopman, G1TLH.")
  • 18:42, 24 January 2023 G0vgs talk contribs created page The crontab file (Created page with "==General Information== The following relates to all versions of DXSpider and is not platform related. ===The crontab file=== Login as 'sysop' and create a file in /spider/local_cmd called crontab. Edit it with your favourite editor and add a line like this (I have included a comment) # check every 10 minutes to see if gb7xxx is connected and if not # start a connect job going 0,10,20,30,40,50 * * * * start_connect('gb7xxx') unless connected('gb7xxx') The callsi...")
  • 18:41, 24 January 2023 G0vgs talk contribs created page Installing the software (Created page with "==Installing the software== At this point you will need to create 2 additional directories under "C:\Spider." Make directories "C:\spider\local" and "C:\spider\local_cmd". If "C:\spider" is missing, go back and figure out why, because it shouldn't be. Now create your own local copy of the DXVars.pm file by:- copy c:\spider\perl\DXVars.pm.issue c:\spider\local\DXVars.pm Now you'll need to edit this file using a text editor like Notepad. If nothing else, you can si...")
  • 18:41, 24 January 2023 G0vgs talk contribs created page Microsoft Windows Installation (Created page with "==Microsoft Windows Installation== ===Introduction=== IMPORTANT: What you'll be left with once you've followed these instructions is (hopefully) a working DX Spider v1.55 system that is capable of accepting or originating "internet" connections, plus inbound and outbound AX.25 and TCP/IP radio connections. Whatever, this document is intended to get you started with DX Spider in a Microsoft Windows (TM) environment. It's not intended to teach you anything other than h...")
  • 18:40, 24 January 2023 G0vgs talk contribs created page Configuration (Created page with "==Configuration== ===Allowing ax25 connects from users=== This is dealt with in the previous section ===Setting up telnet connects (from 1.47 onwards)=== From version 1.47 you can choose to allow the perl cluster.pl program to allow connections directly (i.e. not via the /spider/src/client interface program). If you are using Windows then this is the only method available of allowing incoming telnet connections. to make the change happen... Having done that, you ne...")
  • 18:40, 24 January 2023 G0vgs talk contribs created page Setting up the AX25 Utilities (Created page with "==Setting up the AX25 Utilities== The aim of this section is not to fully cover the installation and configuration of all the possible ax25 modules. I will attempt to cover a simple installation and configure 2 serial ports as if they had TNC's on them. I will also show what additional configuration the DXSpider program requires. Please bear in mind that I am basing this section on a RedHat 7.1 distribution, if you are using SuSe or any other distibution then your mi...")
  • 18:39, 24 January 2023 G0vgs talk contribs created page Running more than one instance of DXSpider (Created page with "Sometimes you may need to run more than one instance of DXSpider on the same machine. The information below should help you achieve that. Although you don't need to create a new user it makes some things slightly easier. So. * create a new user (say sysop2) * login (or su or sudo bash) to root * cd ~sysop2 * mkdir spider * cd /spider * cp -a * ~sysop2/spider * cd ~sysop2 * chown -R sysop2:sysop2 spider * vi /etc/inittab * copy the line: sp:2345:respawn:su -c "perl...")
  • 18:39, 24 January 2023 G0vgs talk contribs created page Centos6 (Created page with "== Introduction == Centos is a community rebuild of Redhat enterprise linux (RHEL) and the instructions given here will also work for other modern redhat based linux distributions such as RHEL,Scientific Linux, Fedora Linux Centos is an excellent choice of linux distribution to run DXSpider on.  RHEL (& by extension Centos) is supported for ten years from it's release date, the Centos 6.x series will be supported until 2020. Installing Dxspider on centos version 6...")
  • 18:38, 24 January 2023 G0vgs talk contribs created page Linux quick installation guide (Created page with "==Linux quick installation guide== This section is designed for experienced Spider sysops who want to install Spider from scratch. It is simply a check list of things that need to be done without any explanations. The name in brackets at the end of each line is the user that should be doing that process. *Login as root *Get the additional CPAN modules and install them (root) *Create the "sysop" user and set a password (root) *Put the Spider tarball in sysop and...")
  • 18:38, 24 January 2023 G0vgs talk contribs created page Linux Installation (Created page with "==Introduction== This section describes the installation of the mojo branch of DXSpider on a Debian based Distribution such as Ubuntu. ==Preparation== I will assume that you have already downloaded the latest tarball of the DXSpider software and are ready to install it. I am assuming version 1.50 for this section but of course you would use the latest version. Login as root and create a user to run the cluster under. UNDER NO CIRCUMSTANCES USE ROOT AS THIS USER!....")
  • 18:38, 24 January 2023 G0vgs talk contribs created page Authors and Contributors (Created page with "DXSpider was written from scratch and almost entirely by Dirk Koopman, G1TLH. The documentation was written, amended and appended to by G1TLH, G0VGS, G0RDI, N7XY, K1XX and EI6IZ. This wiki, based on the documentation distributed with DXSpider, was created, is hosted by and largely maintained by G0VGS. The filtering primer was written by WB3G and N3RD The Slogan page is maintained by HA5DI If you would like to help update and improve the DXSpider wiki project, please...")
  • 18:37, 24 January 2023 G0vgs talk contribs created page DXSpider Installation Manual (Created page with "#Authors and Contributors *Installation under the Linux operating system #Linux Installation ##Introduction ##Preparation ##Installing the software ##Setting callsigns etc ##The client program ##Linux_Installation#Starting up for the first time|Starting up f...")
  • 18:36, 24 January 2023 G0vgs talk contribs created page Hints, tips and common questions (Created page with "==Hints, tips and common questions== '''Q. These commands seem very long! Can I shorten them? ''' Of course you can and the usual abbreviations work. If you are unsure, try it. '''Q. I am not sure if this command is correct. Can I cause any harm if I try it?''' Do not be afraid to try a command to see if it will work, at the worst you will get an error message. If you require any help on a command, just type help followed by the command you want help on. Loo...")
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
Retrieved from ‘https://wiki.dxcluster.org/index.php/Special:Log/G0vgs’